See where your home actually loses energy

A BPI-certified home energy audit with blower door testing, infrared thermal imaging, and combustion safety analysis. We find exactly what's wrong — then show you how to fix it.

Schedule Your Audit Call (301) 960-5297
$100*
Typical out-of-pocket cost
2-4 hrs
Thorough assessment
20-40%
Avg energy savings
What's included in every audit
Blower door air leakage test
Infrared thermal imaging scan
Combustion safety testing (CO, gas)
HVAC & duct system evaluation
Attic, basement & crawlspace inspection
Detailed report with prioritized fixes
Rebate eligibility assessment
BPI Certified Certified Energy Auditor ENERGY STAR Partner Licensed & Insured

Why It Matters

Most energy problems are invisible

The average Maryland home loses 25-40% of its conditioned air through hidden cracks and gaps. You can't fix what you can't see — and you can't see it without the right equipment.

Blower Door Testing
We depressurize your home with a calibrated fan to measure exactly how much air leaks in and out. This quantifies the problem in CFM50 — giving us a real number to improve against.
Thermal Imaging
Infrared cameras reveal temperature differences invisible to the naked eye — showing exactly where heat escapes through walls, ceilings, windows, and electrical penetrations.
Safety Testing
We test every combustion appliance — furnace, water heater, dryer — for carbon monoxide spillage and natural gas leaks. Your family's safety comes first in every audit.
HVAC Assessment
We evaluate your heating and cooling system performance, check refrigerant charge, measure airflow, and test duct leakage to identify efficiency losses in your mechanical systems.
Detailed Report
Within 5 business days you receive a comprehensive report with photos, thermal images, test results, and prioritized recommendations ranked by impact and ROI.
Rebate Roadmap
We identify every rebate and incentive you qualify for — utility programs, federal tax credits, state grants — and show you exactly how much you can save on each improvement.

What to Expect

Your audit, step by step

The whole process takes 2-4 hours at your home. Here's exactly what happens.

Walk-Through
We start with a visual inspection of your home's exterior and interior — looking at insulation levels, window condition, and visible air leakage points.
Diagnostic Testing
Blower door is installed and run. While the house is under pressure, we use thermal cameras and smoke pencils to find every air leak.
Safety Checks
All combustion appliances are tested for CO spillage under worst-case conditions. We also check for gas leaks throughout the home.
Review & Report
We walk through initial findings on-site, then deliver a full written report within 5 business days with photos, data, and prioritized recommendations.

Affordable for Every Homeowner

As low as $100 out of pocket

Utility program rebates cover most of the cost of your energy audit. You get the full BPI-certified diagnostic — blower door, thermal imaging, safety testing, detailed report — for a fraction of the price.

Schedule Your Audit

Rebate availability varies by utility provider and program. We'll confirm your eligibility when you call.

Questions

Energy audit FAQ

Plan for 2-4 hours depending on home size. A typical 2,000 sq ft home takes about 3 hours. We need time to set up the blower door, run all diagnostics, test appliances, and inspect every accessible area of the home.

Yes, we recommend it. You'll learn a lot about your home by watching the process, and we can answer questions in real time. We'll also need you to tell us about comfort issues — which rooms are too hot, too cold, or drafty.

No obligation at all. You still receive the complete report and can use it to get quotes from anyone. Many customers use our audit as a roadmap and do improvements over time. If you do hire us, the audit fee is credited toward your project.

No. The blower door is a calibrated fan that fits in your doorway and creates a small pressure difference — roughly equivalent to a 20 mph wind. It's completely safe and we use it in thousands of homes every year. We also carefully protect your door frame.

A quick energy check-up is a visual walkthrough that takes 30-60 minutes and installs some free LED bulbs and faucet aerators. Our audit is a full diagnostic assessment with calibrated equipment — blower door, infrared camera, CO analyzers, manometers. It takes 2-4 hours and produces quantitative data about your home's actual performance. Very different scope.

Stop guessing. Start testing.

Your home energy audit is the first step to a more comfortable, efficient home — and thousands in utility rebates.

Schedule Your Audit Call (301) 960-5297

Serving Montgomery County, Prince George's County, Baltimore County & DC Metro